Paper articles, cardboards
The information on this page is for reference; it may change according to your cutting conditions.
Please do not hesitate to contact us for further details.
*The information may subject to change without notice. Please check “What’s New” on this website or contact us directly.
Guide to Select CUTTING RULES for Cutting Cardboards
We provide the following CUTTING RULES according to the types cardboards (F/Flute).
Contact us for other products than those shown in the following table. We will offer you the optimum solution.
|NC RULES（0.9×4580、5080）||NC RULES（0.7×4580、5080、6080）|
|NC-D (Double Long Bevel)
|Veneer board||16MM||16MM||16 ｏr 18MM||18MM||18MM|
Application/Performance of CUTTING RULES
|Material (Thickness)||STEEL RULES |
(Standard thickness: 0.7; Numerical figures
in parentheses indicate hardness.)
|Reason of Recommendation(for reference)|
|Cardboard (Standard thickness: 0.8 t)||NC RULES（4572・4580）
|*MIR (No.1) and NCD760 (No.2) to prevent generation of paper dust (MIR is originally manufactured to prevent generation of paper dust.)|
|Laminated paper||NCD (Double Long Bevel)||*When using NC-D (Double Long Bevel) with thickness of 0.7, the blade may deviate.|
|NC-D (Double Long Bevel) -
MIR (Thickness: 0.5; Hardness: 5080)
|（2.0t~）||NC-D (Double Long Bevel) (Thickness: 0.9; Hardness: 5080)|
|Clear cases (PP/PET)||MIR20||*To get a beautiful cut surface|
|MIR-CI20||*To get a beautiful cut surface and improve durability of STEEL RULES|
|ACE80-MIR||*To get a beautiful cut surface and bendability of STEEL RULES|
(UV/PP coating, etc.)
|MIR20||*To get a beautiful cut surface|
|NCD7653-MIR・MAD7653||*To prevent generation of paper dust|